Gasoline Tank Dispenser Hoses – New Requirements in California, February 2006

California regulations require that all underground Gasoline Dispenser Facilities (GDF) be equipped with Phase II vapor recovery systems that have been certified as compatible for fueling vehicles (think hoses) equipped with Onboard Refueling Vapor Recovery (ORVR) systems.  So how do you know your GDF needs upgrades?  Just give your designated operator or gasoline tank contractor a call and hopefully he/she will have an answer.   The deadline for compliance is March 1, 2006.

We wrote to you on some of these related issues on January 17, 2005 as well.  There are two types of dispenser systems approved, the Vapor Assist type or the Balancer type. The new regulation, among other issues, requires you to only upgrade your hoses if you have a Vapor Assist System.  The new requirements are summarized as follows:

  • Vapor Assist System: If you dispense multiple grades of gas thru a single hose, chances are that you have a vapor assist system.  Four dispenser units that have been approved by California Air Resources Board (CARB) are as follows:
    • Balance (CARB Exec Order G-70-52-AM)
    • Gilbarco VaporVac/OPW Vaporsaver (CARB Exec Order G-70-204)
    • Healy (CARB Exec Order G-70-191-AA and VR-201-A)
    • Hirt (CARB Exec Order G-70-177-AA)

If you do indeed need the new hoses, the contractor can apply for permits to the local APCD/AQMD. Please note that if you have the more common Balance type, then you do not need any upgrades to your dispenser.

  • Maintenance Log: You need to add a maintenance log to your records.  The facility already keeps a Designated Operator Manual as part of compliance with State Water Resources Control Board regulations.  Just request your Designated Operator to add the maintenance log to the Manual.  Other CARB requirements (enforced by local APCD/AQMD) may require the facility to conduct a daily check on the gasoline dispensing facility (GDF) and maintain a log.
  • Signs on Dispenser: OnlySCAQMD requires the operator to post nozzle operating instructions and signs as follows:
    • “If you have nozzle problems, please call the Air Quality Management District at the toll-free number (800) 242-4020” and add a warning stating:




  • Each decal sign shall be visible from all fueling positions it serves; and the sign shall be readable from a distance of 3 feet. All other signs, such as pump toppers shall be readable from a distance of 6 feet.
  • Other Signs For Dispenser: Proposition 65 warning should be in place on the dispenser and should be clearly visible (nothing new here).  Your local Fire Department, Environmental Health Department & APCD may require other signs for which compliance is necessary as well.


Download: February 2006 Newsletter

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s